Speedy® High-Efficiency CNC Computer Beam Saw (2800mm / 3300mm / 3800mm)
Dramatically boost your sheet goods throughput with the Speedy® automatic wood MDF cutting CNC computer beam saw. Engineered specifically for high-capacity panel furniture production, this industrial beam saw improves sheet cutting efficiency by up to 70% compared to conventional manual sliding table panel saws.
Powered by a heavy-duty 22 kW total drive system and 1500W servo-driven positioning, the machine achieves an ultra-precise ±0.02 mm positioning accuracy. With stack-cutting capabilities up to 100 mm in thickness, you can easily process multi-layered MDF, particle board, plywood, and solid wood panels in a single pass.
Industrial Rigid Construction & High-Yield Panel Processing
To guarantee lifelong stability under continuous industrial shifts, the main workbench is welded from 25 mm thick steel plate, reinforced by an 18 mm thick subsidiary steel table. This ultra-rigid 5,000 kg chassis eliminates machine vibration, preventing chip-out and maintaining square cuts over years of heavy use.
An integrated dual-blade scoring system pairs a 15 kW high-torque main saw (400 mm blade, 5100 r/min) with a 1.5 kW independent scoring blade (180 mm). This prevents edge tear-out on delicate melamine, veneers, and laminated composite panels.
Key Features & Capabilities
- High-Precision Servo Positioning: Driven by a 1500W servo motor, delivering repeatable positioning accuracy within ±0.02 mm.
- Dual-Blade Scoring System: 400 mm main blade powered by a 15 kW motor (5100 r/min) and 180 mm scoring blade eliminate bottom-edge chipping on laminated sheets.
- Stack Cutting Capacity: Cut panel books up to 100 mm thick to multiply daily output and cut labor cycles.
- Ultra-Rigid Steel Bed: Heavyweight 5,000 kg construction featuring 25 mm and 18 mm welded steel plates for zero frame deformation.
- Full Auto Oil Lubrication: Automated lubrication cycles ensure continuous rail and gear protection without manual maintenance downtime.
- Versatile Stroke Capacities: Available in 2800 mm, 3300 mm, and 3800 mm cutting lengths to fit standard and oversized panels.
- Pneumatic Alignment: Operates at 0.6–0.8 kgf/cm² working pressure for uniform pneumatic panel clamping and steady feeding.
Technical Specifications
| Specification | Technical Data |
|---|---|
| Machine Model / Type | Automatic Wood MDF Cutting Beam Panel Saw |
| Max Cutting Length Options | 2800 mm / 3300 mm / 3800 mm (Customizable) |
| Max Cutting Thickness | 100 mm (Multi-sheet stack cutting) |
| Positioning Accuracy | ±0.02 mm |
| Main Saw Motor & Blade | 15 kW | φ 400 mm (5100 r/min, 60 mm shaft) |
| Scoring Saw Motor & Blade | 1.5 kW | φ 180 mm |
| Total Power Consumption | 22 kW |
| Drive Feed Motors | 1500W Servo Drive System |
| Operating Air Pressure | 0.6 – 0.8 kgf/cm² |
| Lubrication System | Full automatic oil lubrication |
| Machine Dimensions (L × W × H) | 5100 × 5600 × 2200 mm |
| Net Machine Weight | 5,000 kg |
Frequently Asked Questions
Can this computer beam saw handle laminated or veneered panels without chipping?
Yes. The machine features a dedicated 1.5 kW scoring saw blade (180 mm) that scores the bottom veneer before the 15 kW main saw cuts through, preventing tear-out and chipping.
How does this machine compare to a standard sliding table panel saw?
The automatic CNC beam saw cuts processing efficiency by approximately 70%. It enables single-operator stack cutting up to 100 mm thick, automates push alignment, and uses computer control rather than manual indexing.
What sheet dimensions can be loaded on the table?
Standard bed options support 2800 mm, 3300 mm, and 3800 mm cutting lengths, handling standard 4×8 ft, 5×10 ft, and custom-dimension composite panels.
Upgrade your panel sizing line with the industrial Speedy® automatic wood MDF cutting CNC computer beam saw to reduce offcut waste, multiply workshop production capacity, and achieve ±0.02 mm cut precision.
